Local library attribution¶
The LSM6DSV16BX breakout
includes four BX_Breakout:*_HandAssembly derivatives of KiCad 10.0.7's
Resistor_SMD:R_0402_1005Metric, Capacitor_SMD:C_0402_1005Metric,
Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y and
Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm.
Source: KiCad footprint library.
They retain the contributors' CC BY-SA 4.0 licence and design-use exception.
Copper, numbering and model references are preserved; cramped silk is omitted,
the BX paste/mask openings and zone connection are adjusted, and jumper assembly
flags match the schematic. Models are referenced from installed libraries, not
vendored. The breakout guide records the exact changes and pin-map evidence.
Footprints:WS2812C-2020-V6 is derived from the KiCad community footprint
LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm distributed with KiCad 10.0.7.
Source: KiCad footprints.
The local derivative preserves electrical pad geometry and the stock model
association. Its initial changes converted two filled Fab rectangles to polygons
for KiCad IPC rotation and updated the part name/description; later artwork/layer
and stroke changes are recorded in the printed-outline checkpoint.
The stock model is referenced from the installed KiCad model library, not vendored here.
This derivative retains the KiCad library licence: CC BY-SA 4.0 with the documented design-use exception. Copyright and attribution belong to the KiCad library contributors. This notice applies to this derived asset and does not assign a licence to unrelated project assets. Review each source's licence/attribution while consolidating the remaining symbols, footprints and models into project-local libraries.
Upstream licence copy retrieved 2026-10-16 from KiCad's library repository.
Footprints:C_0402_1005Metric and Footprints:C_0603_1608Metric are also
derived from the corresponding KiCad community Capacitor_SMD footprints
distributed with KiCad 10.0.7, under the same licence and attribution. Their
rectangular fab/courtyard outlines are equivalent polygons for arbitrary-angle
IPC placement; copper/mask/paste pads, graphics geometry and stock model
associations are preserved.
Footprints:SW_SPST_TS-1088-xR020 is an unchanged copy of
Button_Switch_SMD:SW_SPST_TS-1088-xR020 distributed with KiCad 10.0.7.
Source: KiCad footprints.
It retains the same KiCad library licence, attribution and design-use exception
above. Its stock 3D model is referenced from the installed KiCad model library;
the model is not vendored here. The exact XUNPU TS-1088-AR02016 land/pin check is
recorded in the band library audit.
Footprints:USB_C_Receptacle_G-Switch_GT-USB-7010ASV is derived from
Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV distributed with
KiCad 10.0.7. Source:
KiCad footprints.
It retains the KiCad library licence, attribution and design-use exception above.
Only the merged GND lands are shortened at the locating-hole-facing ends for
the project's 0.25mm clearance floor; the
band audit
records the exact changes. The stock model reference is retained, not vendored.
MD_DRA371:C_0402_Flex in the detachable microphone project derives from
Capacitor_SMD:C_0402_1005Metric distributed with KiCad 10.0.7. Source:
KiCad footprints.
It retains the KiCad contributors' CC BY-SA 4.0 library licence and design-use
exception linked above. The derivative preserves pad geometry, paste, courtyard
and stock model reference; it omits the cramped silk and sets +0.10mm coverlay
openings. The model remains referenced from the installed KiCad library.
Shared 3D models¶
The current shared STEP model inventory records the models retained locally for portable board rendering, including copies of installed KiCad models. See its EasyEDA / JLCEDA attribution table for the five EasyEDA-sourced bodies, their uses and original download links; models.json pins their hashes and sizes. That inventory describes current model sourcing; the footprint provenance above does not grant a licence to a separately sourced 3D model. EasyEDA model rights remain with their respective owners, and no model-specific redistribution licence has been established.